Canon MVX2i Camcorder User Manual


 
159
E
Additional
Information
DANGER!
Treat the battery pack with care.
Keep it away from fire (or it might explode).
Do not expose the battery pack to temperatures higher than 60°C (140°F).
Do not leave it near a heater, or inside a car in hot weather, for example.
Do not try to disassemble or modify it.
Do not drop or knock it.
Do not get it wet.
WARNING!
The battery used in this device may present a fire or chemical burn hazard
if mistreated. Do not recharge, disassemble, heat above 100°C (212°F) or
incinerate.
Replace the battery with a CR1616 made by one of the following
companies: Panasonic, Hitachi Maxell, Sony, Toshiba, Varta or Renata. Use
of other batteries may lead to fire or explosions.
The used battery should be returned to the supplier for safe disposal.
Cautions:
Do not pick up the battery using tweezers or other metal tools — this will
cause a short circuit.
Wipe the battery with a clean, dry cloth to ensure proper contact.
Keep the battery pack out of reach of children — if it is swallowed, contact
a physician immediately, as the battery case may break down and the
battery fluids damage the stomach and intestines.
Do not disassemble, heat or immerse the battery in water, to avoid the risk
of explosion.
Installing the Backup Battery
Open the backup battery cover and insert
the CR1616 lithium battery with the + side
facing outwards. Click the cover back into
place.
This backup battery allows the camcorder to
retain the date and time and other settings
when the main power source is removed. It
has a life span of about a year.
When it needs replacing (or if it has not
been installed), the y mark flashes in the
display. Remove the old battery by pushing
it up, releasing and lifting it out. Make sure to attach a power source to the
camcorder first, so it will retain your chosen settings when you change the
battery.