Filter
Top Products
36
E
Mastering
the Basics
If Your TV (or VCR) Has Audio/Video Input Terminals
• Connect the camcorder using the STV-250N Stereo Video Cable. Connect
the white plug to the white audio terminal L (left). Connect the red plug to
the red audio terminal R (right). Connect the yellow plug to the yellow
video terminal VIDEO.
• If you are connecting the camcorder to a TV, set the TV/VIDEO selector on
the television to VIDEO.
• If you are connecting the camcorder to a VCR, set the input selector on the
VCR to LINE.
Note:
• If you are going to use the TV as a monitor while you are recording,
remember to keep the TV volume turned down as long as the camcorder’s
audio terminals are connected. If the sound from the TV speakers is picked
up by the microphone, an unpleasant high-pitched squeal, called feedback,
may be produced.
AV
IN/OUT
VIDEO
INPUT
AUDIO
L
R
STV-250N Stereo Video Cable