Filter
Top Products
151
E
Using a Memory Card
Make sure a memory card with enough available memory is inserted into the
camcorder.
1. Turn the POWER switch to PLAY (VCR) and the TAPE/CARD
switch to CARD.
2. Open the menu.
3. Select MY CAMERA.
4. Select CREATE START-UP IMAGE.
• SET THIS AS START-UP IMAGE? YES NO appears.
5. Select the image you wish to save as start-up image with
the CARD +/– buttons.
• SAVE AS \ ORIGINAL1, \ ORIGINAL2, CANCEL appears.
6. Select ORIGINAL1 (ORIGINAL2).
• OVERWRITE ORIGINAL1 (ORIGINAL2)? YES NO appears.
7. Select YES.
• The start-up image will be saved. The start-up image that was saved in
the same location will be erased.
• If you select NO, you return to step 6.
CREATE START–UP IMAGE
MY CAMERA
( 38)
+
PLAY
(VCR)
CARD