Filter
Top Products
166
E
Additional
Information
• AV/PHONES is not set to AV in the
menu.
•AV \ DV OUT (Analog-digital
converter) is not set to OFF.
• The video heads need cleaning
( 161).
• The TV/VIDEO selector on the TV
isn’t set to VIDEO ( 35-36).
• The speaker has been turned off
with the selector dial ( 33).
• Headphones are being used.
? There is no picture on the TV
screen.
? There is no picture on the TV
screen, even though the tape is
moving.
? There is no sound coming from
the speaker during playback.
Memory card operations
Cause and/or what to do about it
• It is not turned the right way
( 107). Turn it the right way and
try inserting again.
• Turn the camcorder's power off
and back on again and remove and
reinsert the card. If the mark
continues to flash, format the
memory card.
• The camcorder is not set to CARD
CAMERA or CARD PLAY (VCR)
( 111, 122) mode.
• The memory card is not inserted
( 107).
• You are using an SD Memory Card
and it is set for erasure prevention.
Change the position of the protect
switch.
• The memory card is full. Erase
images ( 130) or insert a new
memory card.
• The power source is not properly
connected, or the battery pack is
exhausted or not properly attached
( 11-15, 158).
• The function cannot be used in
that recording program ( 59).
• The memory card is not loaded
( 107).
Problem
? The memory card will not
insert.
? The mark flashes red in the
display even though a memory
card has been inserted.
? Nothing happens when I press
the buttons.
? The PHOTO button does not
work.