Filter
Top Products
21
E
Mastering
the Basics
+
CAMERA
TAPE
16:9 (Wide Screen TV Recording)
Produces images in the 16:9 format
for playback on wide screen TVs.
To switch 16:9 to ON, open the menu and select CAM.SET UP.
Then select 16:9, set it to ON and close the menu.
Notes:
• “16:9” is shown in the display when you switch the 16:9 mode on.
• You cannot use the 16:9 mode with the Easy Recording program.
• You cannot use the multi-image screen when setting the 16:9 mode on.
• If you play back a recording made for 16:9 on a normal TV screen, the
image will appear to be vertically “squashed” (compressed).
16:9••••••••OFF
CAM.SET UP
( 38)
Turning Off the Tally Lamp
+
,
+
,
+
PLAY
(VCR)
CARD
PLAY
(VCR)
TAPE
CAMERA
TAPE
The tally lamp lets you know that the
camcorder is recording, receiving
signals from the wireless controller or
counting down for the self-timer.
However, its flashing may be
reflected into the lens during close-
up recording, or when recording
through glass.
You may therefore decide to turn it
off.
To turn the tally lamp off, open the menu and select SYSTEM. Then
select TALLY LAMP, set it to OFF and close the menu.
• The tally lamp no longer flashes during recording, but it will still light up
when the camcorder receives a signal from the wireless controller and
during the self-timer countdown.
TALLY LAMP••ON
SYSTEM
( 38)