Filter
Top Products
140
E
Using a Memory Card
Cancel Printing
Press the selector dial in while the [Now printing] dialog is displayed.
A confirmation dialog displays. Make sure that [OK] is selected and press the
selector dial in.
• With the Card Photo Printer, a print in progress cannot be stopped.
Printing of the next still images will be cancelled and the display will return
to playback mode. With the BJ Printer, printing stops even if it is
incomplete and the paper is fed through.
Restarting Printing
• Open the C.PLAY menu and select \ PRINT. Select [Restart] on the
print dialog and press the selector dial in. The remaining still images will be
printed.
• Printing cannot be restarted in the following circumstances:
- When you have changed the print mark settings.
- If you have deleted a still image marked for printing.
Printing Errors
• If an error occurs during printing, error messages such as “NO INK”,
“PAPER JAM” or “NO PAPER” will display. Select [Stop] or [Continue] with
the selector dial and press the selector dial in.
• With the Card Photo Printer, the [Restart] setting may not appear with
some error messages. In that case, select [STOP].
• With the BJ Printer, the [Continue] and [Stop] options may appear with
some error messages. The error number is displayed on the operation
panel of the Bubble Jet Printer. Please refer to the Bubble Jet Printer Quick
Start Guide for the remedies corresponding to the error numbers.
When Disconnecting the Interface Cable:
Follow below procedure when disconnecting the interface cable.
1. Disconnect the cable from the camcorder and printer.
2. Turn off the camcorder.