Canon MVX2i Camcorder User Manual


 
132
E
Using a Memory Card
Using Printers Supporting the Direct Print Function (Optional)
You can print still images by connecting the camcorder directly to a printer
supporting the direct print function. It can also be used with the print mark
settings ( 128).
Printers supporting the direct print function (As of August 2002): Canon
CP-10/CP-100 Card Photo Printer, Canon Bubble Jet Printer
S820D/S830D/S530D.
Two direct interface cables are supplied with the Card Photo Printer. Use
the cable with the USB logo on the connector (DIF-100).
We recommend that you use a household power source to power the
camcorder when it is connected to the printer.
Also refer to the instruction manual of the respective printer for further
details.
Observe following precautions during printing, otherwise printing may not
be performed correctly.
Do not turn off the camcorder or the printer.
Do not change the position of the TAPE/CARD switch.
Do not detach the interface cable.
Do not open the memory card cover.
Do not remove the memory card.
Connecting the printer to the camcorder
1. Turn the POWER switch of the camcorder to OFF.
2. Attach a power source to the printer.
3. Connect the printer to the camcorder using the interface cable.
4. Turn on the power of the printer.
If your printer is not equipped with a power switch, it turns on when
attaching a power source. Move on to step 5.
(
V
C
R
)
P
L
A
Y
C
A
M
E
R
A
O
F
F
CARD TAPE