Filter
Top Products
56
E
Using the Full
Range of Features
1. Press the (flash) button.
• The display changes in the following order with each press of the button.
• The selected mode appears in the display, with the exception of
(Auto), which disappears after 4 seconds.
• When you press the flash button while Auto is selected and is not
displayed, appears. Then, when you press the button while it is
displayed, you can change the setting.
2. Press the PHOTO button halfway down and hold it.
• The flash automatically rises.
• appears green in the display.
3. Press the PHOTO button fully down to take the still picture.
• The flash fires.
• During recording, the display shows the still image.
During record pause mode
A
A
A
A
(Auto) (Red-eye reduction auto)
(Flash off) (Flash on)
Using the Built-in Flash
You can take natural-looking flash pictures with appropriate illumination even in
dark places using the built-in flash. It also reduces the red-eye effect when
shooting people at night or in dark indoor places.
(Auto): The flash automatically fires according to the brightness of the
subject.
(Red-eye reduction auto): The Super Night LED lights up automatically
before the flash to reduce the red-eye effect.
(Flash on): The flash is forced to fire regardless of the brightness of the
subject.
(Flash off): The flash does not fire. Use this setting when you are
shooting in places where flash photography is prohibited.
A
Changing The Setting of the Flash
+
,
+
CAMERA
CARD
CAMERA
TAPE
//
PHOTO
PH
O
T
O