Filter
Top Products
124
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Choosing Images Individually
1 Choose [Select].
z Following step 2 in “Choosing a Selection
Method” (=
123), choose [Select] and
press the <m> button.
2 Choose an image.
z Press the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <m> button. [
] is displayed.
z To cancel selection, press the <m>
button again. [
] is no longer displayed.
z Repeat this process to specify other
images.
3 Protect the image.
z Press the <n> button. A
confirmation message is displayed.
z Press the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
• You can also select or clear images by touching the screen in step 2, and you
can access the confirmation screen by touching [
].
• You can also protect images by touching [OK] on the screen in step 3.
Selecting a Range
1 Choose [Select Range].
z Following step 2 in “Choosing a Selection
Method” (=
123), choose [Select
Range] and press the <m> button.
2 Choose a starting image.
z Press the <m> button.
z Press the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <m> button.