Canon G1X Mark II Camcorder User Manual


 
90
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
To access the screen in step 2, you can either touch [ ] on the screen in
step 1 or touch [
] on the manual focus screen (=
87).
You can also configure this setting by touching or dragging the bar on the
screen in step 2 to specify a value and then touching [
].
Still Images Movies
Digital Tele-Converter
The focal length of the lens can be increased by approximately 1.6x or 2.0x.
This can reduce camera shake because the shutter speed is faster than it
would be if you zoomed (including using digital zoom) in to the same zoom
factor.
z Press the <n> button, choose
[Digital Zoom] on the [4] tab, and then
choose the desired option (=
26).
z The view is enlarged and the zoom factor
is displayed on the screen.
The digital tele-converter cannot be used with digital zoom
(=
38) or AF-point zoom (=
53).
The shutter speed may be equivalent when you move the zoom lever all the
way toward <i> for maximum telephoto, and when you zoom in to enlarge
the subject to the same size following step 2 in “Zooming In Closer on Subjects
(Digital Zoom)” (=
38).
Still Images Movies
Changing the AF Frame Mode
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
z Press the <n> button, choose [AF
Frame] on the [4] tab, and then choose
the desired option (=
26).
Still Images Movies
1-point
One AF frame is displayed. Effective for reliable focusing. You can also
move the frame by touching the screen (=
91).
A yellow AF frame is displayed with [
] if the camera cannot focus
when you press the shutter button halfway.
To compose shots so that subjects are positioned at the edge or in a corner,
first aim the camera to capture the subject in an AF frame, and then hold
the shutter button halfway down. As you continue to hold the shutter button
halfway, recompose the shot as desired, and then press the shutter button all
the way down ( Focus Lock).
The AF frame position is enlarged when you press the shutter button halfway
and [AF-Point Zoom] (=
53) is set to [On].