Filter
Top Products
68
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Still Images
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
1 Choose [ ].
z Follow steps 1 – 2 in “Specific Scenes”
(=
58) and choose [ ], and then
press the <p> button.
z Press the <q><r> buttons or turn the
<7> dial to choose [
], and then press
the <m> button.
2 Compose the shot and press
the shutter button halfway.
z On the screen, touch the face of the
person who will wink to choose it (Touch
AF), and then press the shutter button
halfway.
z Make sure a green frame is displayed
around the face of the person who will
wink.
3 Press the shutter button all the
way down.
z The camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
z The lamp blinks and the self-timer sound
is played.
4 Face the camera and wink.
z The camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
z To cancel shooting after you have
triggered the self-timer, press the
<n> button.
• If the wink is not detected, wink again slowly and deliberately.
• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
• Closing and opening both eyes at once will also be detected as a wink.
• If winking is not detected, the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[
] in step 1. [Blink Detection] (=
53) is only available for the final shot.
• If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
• You can also choose the shooting mode by choosing [
] in steps 1 – 2 of
“Specific Scenes” (=
58), touching [ ] to access the setting screen,
touching [
], and then touching the same option or [ ].