Filter
Top Products
150
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Check sheet
Network name (SSID/ESSID)
The SSID or ESSID for the access point you use.
Also called the “access point name” or “network name”.
Network authentication / data encryption (encryption
method / encryption mode)
The method for encrypting data during wireless transmission.
○ None
○ WEP (open system
authentication)
○ WPA-PSK (TKIP)
○ WPA-PSK (AES)
○ WPA2-PSK (TKIP)
○ WPA2-PSK (AES)
Password (encryption key / network key)
The key used when encrypting data during wireless
transmission. Also called the “encryption key” or “network
key”.
Key index (transmit key)
The key set when WEP is used for network authentication /
data encryption.
○ 1
Connection methods vary depending on whether the access point supports
Wi-Fi Protected Setup (WPS) or not. Refer to the user manual provided with
your access point to check if it supports WPS.
• A router is a device that creates a network (LAN) structure for connecting
multiple computers. A router that contains an internal Wi-Fi function is called a
“Wi-Fi router”.
• This guide refers to all Wi-Fi routers and base stations as “access points”.
• If you use MAC address filtering on your Wi-Fi network, be sure to add the
camera’
s MAC address to your access point.
You can check your camera’s
MAC address by choosing MENU (=
26) > [3] tab > [Wi-Fi Settings] >
[Check MAC Address].
Connecting to WPS-Compatible Access
Points
WPS makes it easy to complete settings when connecting devices over Wi-
Fi. You can use either Push Button Configuration Method or PIN Method for
settings on a WPS supported device.
1 Confirm that the target device is
connected to the access point.
z This step is not required when connecting
to Web services.
z For instructions on checking the
connection, refer to the device and
access point user manuals.
2 Access the Wi-Fi menu
(=
148).
3 Choose the target device.
z Choose the target device (either press
the <o><p><q><r> buttons or turn
the <7> dial), and then press the <m>
button.
z To connect to a smartphone, choose [ ].
z To connect to a computer, choose [ ].
z To connect to a printer, choose [2].