Filter
Top Products
2.
Repeat the procedure until you finish inputting the pattern number for column Q, then click
Send.
3.
Confirm the displayed message and click OK.
The third pattern is printed.
Important
Do not open the Top Cover while printing is in progress.
7.
Look at the third printout and adjust the print head position.
1.
Check the printed patterns and select the number of the pattern in column a that has the least
noticeable horizontal streaks.
Note
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable
horizontal white streaks.
(G) Less noticeable horizontal white streaks
(H) More noticeable horizontal white streaks
2.
Repeat the procedure until you finish inputting the pattern number for column j, then click Send.
Page top
Page 341 of 437 pagesManual Print Head Alignment