Filter
Top Products
Note
Power and Alarm lamps
You can check the status of the printer by the
Power
and Alarm
lamps.
-
Power
lamp is off: The power is off.
- Power
lamp lights green: The printer is ready to print.
-
Power
lamp flashes green: The printer is getting ready to print, or printing is in progress.
-
Alarm
lamp flashes orange: An error has occurred and the printer is not ready to print.
For details, refer to "
Troubleshooting" in the on-screen manual:
Advanced Guide
.
- Power
lamp flashes green and Alarm
lamp flashes orange alternately: An error that
requires contacting the service center may have occurred.
For details, refer to "Troubleshooting" in the on-screen manual:
Advanced Guide
.
Rear View
(14)
USB Port
Plug in the USB cable to connect the printer with a computer.
Important
Do not touch the metal casing.
Do not plug in or unplug the USB cable while printing.
(15)
Rear Cover
Detach to remove jammed paper.
Refer to "Troubleshooting" in the on-screen manual:
Advanced Guide
.
(16)
Power Cord Connector
Plug in the supplied power cord.
Inside View
(17)
Ink lamps
Light or flash red to indicate the ink tank status.
See Checking the Ink Status.
Page 6 of 437 pagesMain Components