Filter
Top Products
3. INSTALLATION
20
7. Choose either [Yes] or [No]. Click the [Next] button.
The following appears:
8. Click the [Finish] button.
If installation of the printer driver is complete, the icon for the
new printer will appear in the [Printers] folder window.
9. Restart the computer.
3.3.3 Uninstall
The printer driver uninstall procedure is described below:
1. Delete the printer.
Click to select [Setting] > [Printer] from the [Start] menu.
The [Printers] folder window is displayed.
2. Click the [FUJIFILM PICTROGRAPHY3500] icon, then click
[Delete] from the [File] menu.
You will be prompted to confirm the delete. Click the [Yes] but-
ton.
3. Delete [PICTRO SCSI Port].
In the [Printers] folder window, click [Server Properties] from
the [File] menu.
The [Print Server Properties] dialog box is displayed.
4. Click the [Ports] tab.
Click [PICTRO SCSI:] from the list of [Ports on this Server],
then click the [Delete Port] button.
You will be prompted to confirm the deletion. Click the [Yes]
button.
3.4 Windows 2000
Note the following when installing the printer driver in Windows
2000:
*You must be logged on as a user assigned to the Administrators’
Group.
* In the [File signature verification] field in the [Driver Signing
Option] dialog box, check to make sure that either [Ignore-In-
stall all file, regardless of file signature] or [Warm-Display
a message before installing an unsigned file] is specified.
To display the [Driver Signing Option] dialog box, click the
[Control Panel] > [System] > [Hardware] tabs, then click the
[Driver Signing] button.
3.4.1 For Local Printing
To enable local printing, install the printer driver as follows:
1. Insert the PICTROGRAPHY3500 Printer Driver CD-ROM into
the PC.
2. Click to select [Settings] > [Printers] from the [Start] menu.
The [Printers] folder window is displayed.
3. Install [PICTRO SCSI Port].
Click [File] > [Server Properties] in the [Printers] folder.
This displays the [Print Server Properties] dialog box.
Click the [Ports] tab.
The following appears.