Filter
Top Products
basics guide
38
(continued from
previous page)
Printing is very
slow.
You may have
selected the
Improve colors or
Extend colors
settings from the
printer’s control
panel.
Turn these settings off to speed up the
printing process. For more information,
see the set defaults on your printer section
of Printer Help.
The printer will not
turn on.
The printer may
have drawn too
much power.
Unplug the printer’s power cord and wait
approximately 10 seconds. Reconnect the
power cord and press the P
OWER
button
to turn the printer on.
The printer is
plugged into a
power strip and the
power strip is
turned off.
Turn the power strip on.
The Print light is
blinking green but
the printer is not
printing.
The printer may be
processing
information.
Be patient. The printer needs some time to
finish processing the information.
The Print light is
blinking amber.
The printer needs
attention.
Try the following:
1 Check the printer’s LCD and the
computer monitor for instructions.
2 If this does not work, and you have a
digital camera connected to the printer,
check the camera’s LCD for
instructions.
3 If this does not work, turn the printer
off. Unplug the printer’s power cord,
wait one minute, then plug it in again.
Turn the printer on.
Problem Possible cause Solution