Filter
Top Products
basics guide
42
(continued from
previous page)
No page came out
of the printer.
The printer may still
be processing
information.
For more information, see printer
problems on page 35.
Macintosh OS 9.x
only
No page came out
of the printer.
Not enough
memory is
allocated in the
system’s
PrintMonitor
application.
Allocate more memory to the application
in the Get Info dialog box.
A blank page came
out of the printer.
The print cartridge
may be out of ink.
Print a diagnostic page and replace the
print cartridges if necessary.
You may have
previously started a
print job and then
cancelled it.
If you cancel a print job before the file
starts printing, the printer may have
already loaded paper in preparation for
printing. When you start the next print
job, the printer ejects the blank page
before continuing with the current job.
You may be trying
to print a fax.
Try the following:
1 Save the fax in a graphic format, such
as TIFF.
2 Place it in a word processing document
and print it from there.
You are printing in
Reserve Mode with
only the black print
cartridge installed
and with borderless
printing turned on.
The printer cannot
print borderless
4x6inch
(10 x 15 cm)
photos in
grayscale.
Replace the missing print cartridges with
new ones.
OR
Turn borderless printing off.
For more information on printing in
Reserve Mode, see use reserve mode on
page 9.
Problem Possible cause Solution