Filter
Top Products
Secure Disk Erase provides three different levels of security:
●
Non-Secure Fast Erase: all pointers to the information are erased. The information itself
remains on the hard disk until the disk space it occupies is needed for other purposes, and it is
then overwritten. While it remains on the disk, it is difficult for most people to access, but may be
accessed using software designed for the purpose. This is the normal method in which files are
erased on most computer systems; it is the fastest method but the least secure.
●
Secure Fast Erase: all pointers to the information are erased, and the information itself is also
overwritten with a fixed character pattern. This method is slower than Non-Secure Fast Erase, but
more secure. It may still be possible to access fragments of the erased information by using special
tools to detect residual magnetic traces.
●
Secure Sanitizing Erase: all pointers to the information are erased, and the information itself is
repetitively overwritten using an algorithm designed to eliminate any residual traces. This is the
slowest method, but the most secure. Secure Sanitizing Erase meets the US Department of Defense
5220-22.m requirements for clearing and sanitization of disk media. This is the default security
level when using Secure Disk Erase.
Secure Disk Erase is one of the facilities provided by Web JetAdmin, which is HP's free Web-based
print management software. See
http://www.hp.com/go/webjetadmin/.
If you have difficulty in using Secure Disk Erase from Web JetAdmin, please contact HP Support. See
HP Customer Care on page 176.
NOTE: If you choose to erase the whole hard disk, you may be asked to restart the printer several
times during the process, which will take about 6 hours with Secure Disk Erase or 24 hours with Secure
Sanitizing Erase.
142 Chapter 11 Maintain the printer ENWW
Maintain the printer