Filter
Top Products
●
In the Mac OS X 10.5 or 10.6 Print dialog: select the Margins/Layout panel.
●
On the Embedded Web Server's Submit Job page: select Advanced settings >
Paper > Layout/Margins.
You will then see at least some of the following options.
NOTE: Under Mac OS, the available margins options depend on the paper size selected in the Page
Setup dialog. For instance, for borderless printing you must select a paper size name that includes the
words “no margins”.
●
Standard. Your image will be printed on a page of the size you have selected, with a narrow
margin between the edges of the image and the edges of the paper. The image should be small
enough to fit between the margins.
●
Oversize. Your image will be printed on a page slightly larger than the size you have selected. If
you cut off the margins, you will be left with a page of the size you selected, with no margins
remaining between your image and the edges of the paper.
●
Clip Contents By Margins. Use this option when your image has white borders and a size
equal to that of the paper you have selected. The printer will use the white border for its margins
and you will get a page of size equal to that which is selected in the driver.
●
Borderless. Your image will be printed on a page of the size you have selected, with no
margins. The image is slightly enlarged to ensure that no margin is left between the edges of the
image and the edges of the paper. If you select Automatically by Printer, this enlargement is
done automatically. If you select Manually in Application, you should ensure that the image
size in your application is slightly larger than the paper size.
Print on loaded paper
To print a job on whichever paper is loaded in the printer, select Any in the Paper Type option of your
printer driver.
●
In the Windows driver dialog: select the Paper/Quality tab, then select Any in the Paper
Type drop-down list.
● In the Mac OS X 10.4 Print dialog: select the Image Quality panel, then select Any in
the Paper Type drop-down list.
●
In the Mac OS X 10.5 or 10.6 Print dialog: select the Paper/Quality panel, then select
Any in the Paper Type drop-down list.
NOTE: Any is the default Paper Type selection.
Rescale a print
You can send an image to the printer at a certain size but tell the printer to rescale it to a different size
(normally larger). This may be useful if your software does not support large formats.
86 Chapter 6 Print options ENWW
Print options