Filter
Top Products
6.
If you have a take-up reel (a standard feature on the 1.5m printer and an optional accessory on
the 1.1m printer), a message will appear on the front panel asking if you want to load paper onto
the take-up reel. If you select No (or if you do not have a take-up reel) the front panel displays the
Ready message and the printer is ready to print. If you select Yes, a message will appear on the
front panel asking if you want to load the take-up reel now or during printing.
●
If you want to load the take-up reel now, select Load take-up reel now, read through the
introductory text in the section
Use the take-up reel on page 37, and then continue to step
3 of the procedure.
●
If you want to load the take-up reel during printing, select Load it during printing, read
through the introductory text in the section
Use the take-up reel on page 37, and then
continue to step 3 of the procedure.
NOTE: Familiarize yourself with the procedural steps, because loading the take-up reel
while printing requires you to complete the procedure while the printer is feeding and
printing paper. Loading the take-up reel during printing saves approximately 1 m (3 ft) of
paper.
NOTE: During the initial printer setup, printhead alignment and color calibration are performed
automatically after the roll is loaded into the printer.
Unload a roll from the printer
NOTE: If you used the take-up reel (a standard feature on the 1.5m printer and an optional accessory
on the 1.1m printer) during printing, unload the printed roll from the take-up reel before attempting to
remove the roll from the printer. See
Unload a roll from the take-up reel on page 43.
1.
At the printer's front panel, select the
icon, then Paper unload > Unload roll.
2.
The paper is unloaded from the printer.
3.
Release the spindle lock.
4.
Remove the roll from the printer, pulling out the right end on the right side of the printer first. Do
not insert your fingers into the spindle supports during the removal process.
Use the take-up reel
CAUTION: Make sure the printer is turned off when installing the take-up reel motor on the printer.
ENWW
Unload a roll from the printer
37
Handle the paper