Filter
Top Products
Overview of the paper advance procedure
1.
On the front panel, select the
icon, and then select Image quality maintenance >
Paper advance calibration > Calibrate paper advance. The printer automatically
calibrates the paper-advance and prints a paper advance calibration image.
2.
Wait until the front panel shows the status screen, and then reprint your image.
NOTE: The calibration procedure takes approximately six minutes. The front-panel display
shows any errors in the process.
If you are satisfied with your image, continue using this calibration for your paper type. If you see
improvement in your image, continue with step 3. If you are dissatisfied with the calibration, return
to the default calibration. See
Return to the default calibration on page 47.
3.
To fine-tune the calibration, select the
icon, and then select Image quality maintenance
> Paper advance calibration > Adjust paper advance.
4.
Select the percentage of change from -100% to 100%. To correct light banding, decrease the
percentage. To correct dark banding, increase the percentage.
5.
Press the OK key on the front panel to save the value.
6.
Wait until the front panel shows the status screen, and then reprint your image.
Return to the default calibration
Returning to the default calibration sets all the paper-advance calibration to zero. To return to the
default paper advance-calibration value, you must reset the calibration.
1.
On the front panel, select the
icon, and then select Image quality maintenance >
Paper advance calibration > Reset paper advance.
2.
Wait until the front panel shows that the operation has been successfully completed before you
press the Back key to return to the Ready screen.
Download paper presets
Each supported paper type has its own characteristics. The printer changes the way it prints on each
different paper type. For example, some might need more ink and some might require a longer drying
time. The printer requires a description of the requirements of each paper type. This description is
called the “paper preset”.
The paper preset contains the ICC profile, which describes the color characteristics of the paper. It also
contains information about other characteristics and requirements of the paper that are not directly
related to color. Existing paper presets for your printer are installed in the printer's software.
Your printer contains paper presets for only the most commonly used paper types. If you buy a paper
type for which your printer has no preset, you cannot select that paper type in the front panel.
ENWW
Download paper presets
47
Handle the paper