Filter
Top Products
6.
Slide the spindle into the roll. Make sure that no space exists between the roll and the fixed hub at
the right end of the spindle.
Make sure that the paper will wind off the roll in the correct direction. If it does not, remove the
spindle from the roll, turn the roll 180° and rest it on the loading table. Then slide the spindle into
the roll.
NOTE: A label on the spindle also shows the correct winding direction.
7.
Put the blue hub on to the upper end of the spindle, and push it towards the end of the roll as
shown in step 1 in the following image. Then slide the lever-lock to the locked position as shown in
step 2.
8.
With the blue hub on the left, insert the spindle into the left side of the printer (1), and then into the
right side of the printer (2).
9.
Close the spindle lock on the right-hand side.
ENWW
Load a roll onto the spindle
35
Handle the paper