Filter
Top Products
9.
To create an ICC profile, which allows you to print on your paper with the best possible color
accuracy, see
Color profiling on page 102.
10.
Perform paper advance calibration (see
Perform paper advance calibration on page 46). The
default paper advance values for your custom paper are inherited from the paper category, but
can probably be improved by calibration.
Cancel the drying time
Press the Form Feed and Cut key on the front panel.
CAUTION: A print that has not dried sufficiently can suffer from quality problems.
Change the drying time
You can use the HP Utility to change the drying time for a particular paper type, to accommodate
special printing conditions.
1.
Open the HP Color Center.
2. Select Paper preset management.
3. Select Change printing properties.
4.
Select the paper category.
5.
Select the paper type.
6.
Choose a drying time from the Dry Time drop-down menu.
NOTE: The text box to the right of the drop-down menu will not display the time in seconds
when the Automatic option is selected (it is selected by default for all paper types). This is
because the Automatic option means that the printer will calculate the optimal drying time for
you depending on the temperature at printing time, and therefore it cannot be known in advance.
You can turn off all drying time for all paper types by selecting the icon, then Print retrieval >
Select drying time > Off.
For more information about drying time, see
Drying time on page 31.
Printing paper info
The Printing paper info option is enabled by default; it allows the printer to estimate the remaining
roll length by reading a barcode that is printed on the leading edge of the roll whenever the paper is
unloaded.
When you load a new, unused roll, there is no barcode already printed on it, so the front panel will
ask you for the length. The length printed on the barcode at unloading time is calculated from the
length you declare at the start, minus the length that has been printed.
NOTE: If you declare at loading time that the length of the roll is unknown, and then later reload the
same roll, the front panel will request the length again.
ENWW
Cancel the drying time
49
Handle the paper