Filter
Top Products
Go To
From the Disc Navigation screen, you can jump to the first scene or last scene, and playback will
start from that point.
MOVING TO BEGINNING (END) OF HDD/DVD/CARD
I Press the DISC NAVIGATION button. 3 Use the I,ql_/l_l/_l/_/l_'/|| buttons to
choose "Top" or "End" on the "Go To" menu
2 Press the MENU button, screen, and then press the 1_'/1| button.
4 Press the 10../|| button to start playback.
m
HDD/DVD/Card Management
INITIALIZING HDD/DVD/CARD
Initializing the HDD, a DVD-RAM/DVD-RW/+RW o1:card _ill allow you to delete any recorded
contents. Before using a DVD-RW/+RW on this video camera/recordm_ you must format it.
Before You Begin
• Be sure to use the AC adapter/charger to power the DVD video camera/
recorder for initialization. If the DVD video camera/recorder is turned off
during initialization and the initialization is interrupted, incorrect
initialization will result and the incorrectly initialized disc will be
unusable.
• If you use a brand-new DVD-RW/+RW, message "DVD is not formatted"
will appear: Initialize the disc, following the subsequent messages
(p. 41).
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use the I,ql_l/l_l/_/_/l_/|| buttons to
choose "Format HDD', "Format DVD" or
"Format Card" on the "HDD Setting", "DVD
Setting" o1:"Card" menu screen, and then
press the 1_'/1| button.
Note:
• If you wish to delete all recorded contents, it is
recommended that you use initialization, which will
delete all the scenes in much less time than using the
scene delete function.
• Initialization will delete all the recorded contents on HDD,
disc or card: Be careful not to delete data by mistake.
• It may not be possible to initialize a disc with many
scratches or dirt: Such a disc cannot be used (p. 10).
• This DVD video camera/recorder may not recognize
some discs or cards that have been initialized on PC
or a device other than this DVD video camera/
recorder.
• If you attempt to initialize a disc or card inthis DVD
video camera/recorder when it is connected to PC via
PC connection cable, the disc or card may not be
initialized and may be unusable on this DVD video
camera/recorder.
If you choose the VR mode when initializing a
finalized DVD-RW (VR-mode), the finalization will not
be released. (The DVD-RW will be afinalized disc
without any recorded data, and recording will be
possible on it.)
Choosing the VF mode will release the finalization of
the disc.
The screen for verifying "Format HDD',
"Format DVD" or "Format Card" will appear.
4Choose "YES", and then press the I_/ll
button.
When using DVD-RW, a screen for prompting •
you to choose the VF o1:VR mode will appear.
Choose "NO" to cancel initialization.
105