Filter
Top Products
OSwitching the information display mode
You carl switch the display mode of on-screen information:
Press the DISPLAY button.
The full and minimum display modes will alternate.
• Full display mode: All types of information will
appear.
• Minimum display mode: The recording mode (see
i on page 46) and recording status (see 11 on
page 46) will appear. If the DVD video camera/
recorder has _xarning information, a warning message will appeal_
Note:
The DVDvideocamera/recorder does not recordthe dateand time as a part of image.However,this information
during recording will be recorded with imageas datawhich can be checked on DiscNavigation screen during
playback(see "INFORMATIONDISPLAY DURINGRECORDING" on page 46).
ODisplay when recording an image of yourself
When recording with the LCD screen facing the same direction as the
lens, the operating status will appear: The battery remaining level will
appear only when the remaining level is very lo_x: and the display will
blink.
Operating status/warning message
Battery remaining level_,w I
I-
No warning/message (see page 46) _xill appear when recording with the LCD screen facing the same
direction as the lens.
Instead, the following screen display symbols will blink to inform you of the operation status of
DVD video camera/recorder.
When the LCD monitor is turned 180" from the position with the LCD screen facing the same
direction as the lens, the warning/message can be checked.
49