Filter
Top Products
Initial Settings
Press the MENU button, and then use I_I_/IN_I/,qHI/I_I_/I_/II buttons to display the "Initial Setup"
menu screen. See page 51 for detailed operation procedure. Press the MENU button again to exit
setting.
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
Select "On" or "Off", and
then press the I_/1| button.
On: Beep will be heard
when the power
switch is changed
ovel; the REC button is pressed when
HDD/disc is used, the SLEEP/START oi:
EJECT button is pressed, etc.
Off: No beep is heard.
Note:
The "Beep" setting will be stored in memory even when
the DVD video camera/recorder is turned off.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
Select "On" or "Off", and
then press the 1_/|| button.
On: To engage power
save. If the DVD
video camera/
recorder is left in the recording pause status
without being operated for 5 minutes, it
will automatically turn off to prevent the
battery from discharging needlessly.
Off: To cancel power save.
Note:
• To turn the DVD video camera/recorder on again from
automatic off activated by the power save function,
set the power switch to "OFF", and then set it to
"HDD", "DVD" or "SD".
• The Power Save setting will not appear in the on-
screen information display•
• If the sleep/start standby status continues for 30
minutes, the DVD video camera/recorder will
automatically turn off regardless of the Power Save
setting.
CHANGING DISPLAY LANGUAGE (LANGUAGE)
You can change the language used to display the menu and information.
The following shows that English is changed to French.
1Press I_/ll or I1_ button
with the screen shown
on the right displayed:
The "Language" screen
will appeal:
2 Choose "Fran_ais', and
then press I_/ll button.
The display will change
to French.
ni ia e u •
_ P0_r sav_ off
_ Enansh
R_et
_)ENTER_JRETURN ffH_
Note:
The language setting will be stored in memory even
when the DVD video camera/recorder is turned off.
36