Filter
Top Products
Swift Restart of Recording (SLEEP/RESTART
button)
If you press the SLEEP/RESTART button while in the recording pause status instead of turning the
DVD video camera/recorder off, the status that recording is possible will be restored in approx, one
second.
Setting to the sleep/restart standby
status:
Press the SLEEP/RESTART button in tire
recording pause status.
The SLEEP/RESTART button will light, and the
DVD video camera/recorder will enter the
sleep/restar t standby status.
In the following eases, pressing the SLEEP/
RESTART button will not set the DVD video
camera/recorder to the sleep/restart standby
stahls:
• No disc is loaded although the power switch is set to
"DVD".
• No card is loaded although the power switch is setto
"SD",
• An unusable disc or card is loaded.
• The HDD or a loaded DVD or card has no remaining
free space.
• The Disc Navigation screen is being displayed.
• During playback.
Restoring from sleep/restart standby
status:
Press the SLEEP/RESTART button that is lit:
The DVD video camera/recorder will return to
the recording pause status.
Pressing the REC or PHOTO/SELECT button
will also restore the DVD video camera/
recorder to recording pause from the sleep/
restart standby status.
The following operation will release the sleep/
restart standby status:
• Press down the DISC EJECT button,
• Change over the power switch CHDD"4->"DVD").
Note:
• If you press the REC or PHOTO/SELECT button while
in the sleep/restart standby status, the sleep/restart
status will be released but recording of a video or
photo will not start, To record, press the REC or
PHOTO/SELECT button again,
• After the DVD video camera/recorder is restored from
the sleep/restart standby status, the zoom position
will return to 1 to 1,5x. The settings on manual focus,
exposure and rear lighting will also reset to the initial
values.
• The DVD video camera/recorder in sleep/restart
standby status consumes approx, half the power it
does during ordinary recording, but the recerdable
duration in that status will be longer than standing by
in the recording pause status,
• If the sleep/restart standby status continues more
than 30 minutes, the DVD video camera/recorder will
turn off regardless of the Power Save setting (leaving
the DVD video camera/recorder in recording pause
status for 5 minutes will also turn it off: Default).
• Setting the power switch to OFF in the sleep/restart
standby status will turn the DVD video camera/
recorder off,
SLEEP/RESTART button
45