Filter
Top Products
Using Software
See page ]32 when using Macintosh.
[When using Windows]
USING IMAGEMIXER 3
lmageMixer 3 allows you to capture the images recorded on the DVD video camera/recorder into
PC, edit the video file, and create a DVD-Video or DVD-VR using the video file.
The following shows the basic operation of IrnageMixer 3.
Refer to the electronic instruction manual that can be read on PC for detailed instructions about
lmageMixer 3: While ImageMixer 3 is being activated, click "Help" - "ImageMixer Help (El)" to
display this manual. See the electronic instruction manual for explanation on how to edit video files.
To start ImageMixer 3, double-click the ImageMixer 3 shortcut that _xas created when it _xas
installed.
* If there is no ImageMixer 3 shortcut on desktop, choose [Start] - [Programs] or [All programs] -
[PIXELA] - [hnageMixer 3] - [hnageMixer 3].
VIEWING IMAGES RECORDED ON HDD/DISC USING PC
* A DVD-RW/DVD-R/+RW recorded on this DVD video camera/recorder must be finalised on this
DVD video camera/recorder (see page 108).
1 Connect this DVD video camera/recorder to
the USB port of PC.
To view images recorded on a disc, first insert
the disc you wish to play back into the DVD
video camera/recorder, and then connect the
DVD video camera/recorder to the USB port
of PC.
2 Start ImageMixer 3.
When hnageMixer 3 starts up, the launcher
shown below will appear: Click "Edit Video".
Click
0 Click "Edit new video".
4The T_r°lect" settin._- sc]een" wdl" appear: Click
"OK".
Click
It is not necessary chance any settin_z wneI1
using PC to view the images recorded on
HDD/disc.
127