PROTECTION
You can protect the HDD and a DVD-RAM/DVD-RW (VR-mode) in order to prevent recorded
images from being erased o1:edited by mistake. Further recording will not be possible on protected
disc until the protection is released.
1Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use the I'ql,I/l,!,'l/_l_/l,'l,'/l,/ll buttons to
choose "Protect HDD'or "Protect DVD" on
tire "HDD setting" or "DVD Setting" menu
screen, and then press the I1_/|| button.
4 The screen for verifying protection will
appear:
Note:
• To release protection, perform steps 1-3: The screen
for verifying the release of protection will appear.
Choose "YES" to release the protection.
• If disc protection has been engaged on another
device, it may not be releasable on this DVD video
camera/recorder: Use the original device that
protected the disc to release the protection.
Choose "YES", and then press the I'/11
button.
Choose "NO" to cancel protection.
After "YES" or "NO" setting, the Disc
Navigation screen will be restored.
VERIFYING REMAINING FREE SPACE ON DISC OR CARD (CAPACITY)
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use the I_1_/1_,'1/_1_/1_1,'/_'/|| buttons to
choose "Capacity" on the "HDD Setting",
"DVD Setting" or "Card" menu screen, and
then press the I1_/|| button.
4 Press the • button to quit.
The Disc Navigation screen will be restored.
Note:
If the HDD is protected, or a write-protected disc or
locked card is used, the remaining space will always be
displayed as "0".
(When usingHDD/ (When usingcard)
DVD)
r nr,,Y Approx
VIOEO(XTRA) 17min PHOTO(FINE) 462
"1 -- Vll)EO{FINE) 26trin PHOTO(NORM) 924
VIDEOrSTDI 54min PHOTO(ECO) IB48
Capacity 90% I Capar itY 96%
_ I I _ETURN I
I
"1 WithDVD-RW(VF-mode)/DVD-R:The quality
mode first used for recording with disc willappear
106