Filter
Top Products
UPDATING CONTROL INFORMATION OF HDD/DVD-RAM/DVD-RW (VR-
MODE) (UPDATE CONTROL INFO.)
Disc Navigation in this DVD video camera/recorder handles information on scenes, such as
thumbnail, skip, fade, in a particular manner. If you use another device to edit a disc recorded on this
DVD video camera/recordel, and then use the data again with Disc Navigation in this DVD video
camera/recordeb the Disc Navigation may not appear normally. If this happens, use the Update
Control lnfo function to update the data.
When using the AC adapter/charger to power the DVD video camera/
recorder for updating control information, make sure that power is not
Before You Begin turned off during updating. If the DVD video camera/recorder is turned
off during updating and the updating is interrupted, the control
information will not be updated correctly.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use the I,_/IN_I/,_I/),'I_/II_/I| buttons to
choose "Update Control Info." on the "HDD
Setting" or "DVD Setting" menu screen, and
then press the 1_/|| button.
The screen for verifying "Update Control
Information" will appear.
4Choose "YES", and then
press the 1_/|| button.
The message for
proceeding will appeal;
and then the Disc Navigation menu screen
will be restored.
A black screen may appear while the message
for updating is displayed.
Choose "NO" to cancel updating.
Note:
• It maytake time to updatethe control information if
the HDD/dischas many recordedscenes.
• Evenif control information is updated, some discs will
be unusable on DiscNavigationof this DVDvideo
camera/recorder.
DELETING DATA ON HDD (FULL FORMAT)
Executing "Format HDD" in "HDD Setting" to delete data on HDD will only change the file control
information: It will not delete the data completel}: _%hen discarding or transferring this DVD video
camera/recorder, be sure to delete any personal data on the HDD in order to prevent it from leaking out.
Before You Begin
• Use the AC adapter/charger to power the DVD video camera/recorder
when completely deleting the data on the HDD: This is not possible with
a battery.
• If power is turned off and Full Format is interrupted midway, normal
deletion will not be possible.
• Executing Full Format will delete all data on the HDD. Save any
important data on DVD before starting complete deletion.
• It will take approx. 30 minutes for complete deletion: In rare case, it may
take more than one hour.
4
/ Press the DISC NAVIGATION button, and
then the MENU button.
2 Use the 141_/_1_/'4"4/_ll) buttons to choose
"HDD Setting", "Full Format", and then press
the II)/1| button: The "HDD Full Format"
screen will appear.
3 Choose "YES", and then press the II)/1|
button.
The HDD will be completely cleared.
To cancel clear, choose "NO": The Disc
Navigation screen will be restored.
107