Filter
Top Products
SWITCHING QUALITY OF STILL IMAGE (QUALITY)
You carl switch the still recoMing quality.
1 Press the MENU button, use the 1411/_1"1/
illll41"lll'ill buttons to choose "Quality" on
the "Record Functions Setup" menu screen,
and then press the I,./1| button.
2 Choose the option you want, and then press
the l'/ll button.
3 Press the MENU button to end the setting.
Note:
• The still quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
RECEIVING IMAGE FROM ANOTHER DEVICE (INPUT SOURCE)
If you wish to input an image from another device to this DVD video camera/recorder, you must
first switch the setting on the DVD video camera/recorder.
Refer to the explanation starting from page 115 on how to connect the DVD video camera/recorder
to other devices or record images input from them.
The DZ-HS300A cannot receive any externally input signal.
CAMERA Usually select this option No display
LINE To input image from another device L IN
S LINE To input S-VIDEO signal from another device S IN
1 Press the MENU button, use the _/_t_1/
ll/l_/l'/ll buttons to choose "Input
Source" on the "Record Functions Setup"
menu screen, and then press tile I,./1| button.
2 Choose "LINE", and then press the I,/11
button.
3 Press the MENU button to end the setting.
Note:
The "Input Source" setting will return to "CAMERA"
whenever the DVD video camera/recorder is turned off.
67