Filter
Top Products
CHANGING IMAGES FOR THUMBNAILS (EFFECT - THUMBNAIL)
N_rmallv,, the first image,- of the recorded scene is displayed as a thumbnail: You can choose another
image of the scene for thumbnail. If you set a vivid image to thumbnail, you can know what you
recorded from a glance at the Disc Navigation screen.
1Press the DISC NAVIGATION button.
2 Place the cursor on the scene whose
thumbnail you wish to change.
3 Press the MENU button.
4 Choose "Scene", "Effect", "Thumbnail", and
then press the I_/|| button.
5 The "Change Thumbnail" screen will appear:
If you are sure you want to change the
thumbnail of the selected scene, press the
I_/|| button: The selected scene will be played
back.
Note:
• If you press the MENU button before pressing the
1/11 button in step 6, the submenu screen will appear
(p. 86).
• A thumbnail of still cannot be changed.
• Since the scene to which skipping is set cannot be
played back, you will not be able to change its
thumbnail: Release the skip setting of the scene to
change the thumbnail.
• If a disc on which thumbnail has been set with this
DVD video camera/recorder is played on a DVD
reorder/player, or the scene is captured into a PC, the
set thumbnail will net be reflected (see Note on
page 80).
• When dubbing on a DVD-RW (VF-mode)/DVD-R/
+RW, the setting on changing thumbnail will net be
reflected (see page 84).
If you want to change the scene whose
thumbnail is to be changed, you can change it
on this screen.
6 When the image you want to use as the
thumbnail of the scene appears, press the
PHOTO/SELECT button.
7 The screen for verifying switching of
thumbnail will appear: Choose "YES", and
then press the I_/|| button.
Choose "NO" to cancel switching of
thumbnail.
After Yes or No setting, the "Change
Thumbnail" screen will be restored.
Repeat steps 5 - 7 to change the other scenes.
8 Press the • button to quit.
9O