Hitachi DZMV100A Camcorder User Manual


 
142
Recording Image from Other AV Devices
You can transfer any image recorded on videotape, etc. to the DVD camcorder via the
AV input/output jack, and record it on DVD-RAM disc.
Connecting to Other AV Device
Use the AV input/output cable (provided) or S-video cable (generally available) to con-
nect the DVD camcorder to other AV device as follows:
Cautions
Be sure to turn off this DVD camcorder and any other devices before connecting them.
When the AV input/output cable and S-video cable are connected simultaneously, the video input from
the S-video cable has priority.
In case of camera recording with this DVD camcorder, do not connect the AV input/output cable or S-
video cable to the output jacks of any other device: If you do this, sound from the other device may
leak to this DVD camcorder.
If you use a Hitachi VCR, it will be operated by the remote control provided with the DVD camcorder.
When recording an image from a Hitachi VCR, change the remote control code of the VCR to other than
"VCR2".
You cannot record a movie or still without inputting an image.
S-video cable (generally avairable)
AV input/output cable (provided)
To S-video
output jack
of VCR
To video/audio
output jacks of VCR
AUDIO/VIDEO
EXT.MIC
DIGITAL
S
V
I
D
E
O