Filter
Top Products
43
PUSH
Setting Up the Battery
1. Turn the DVD camcorder off.
2. Fully pull out the viewfinder and raise it.
3. While holding the Battery eject button
above the battery attachment platform,
slide the battery upward to remove it.
Battery remaining level indicator:
When the battery is used to power the DVD camcorder, the battery remaining level ap-
pears in the viewfinder or on the LCD screen, and in the information LCD as follows:
The battery remaining level display in the information LCD is different from the above
(see p. 63).
Tips for Skillful Use of Battery
Be sure to use the specified battery (DZ-BP16 or DZ-BP28):
Using other batteries could cause faulty DVD camcorder operation, or possibly a fire.
Charge the battery immediately before using the DVD camcorder:
If a charged battery is stored, it will discharge on its own; therefore, it is recom-
mended that you charge the battery shortly before using the DVD camcorder, such as
on the day before you plan to use it. You do not need to completely discharge the
battery before charging it.
Fully charged Nearly empty
(Blinks)
White portion shows
remaining level.
2
3
3