Filter
Top Products
52
Setting Date and Time
Set the current date and time correctly so that the date and time you make a record-
ing can be recorded correctly.
Setting the correct date and time will allow you to store the correct information on
recording.
(The following procedure can also be used to correct the date and time you have
already set.)
1. Turn the DVD camcorder on.
While holding down the button at the center of
POWER switch, push the switch down.
When the DVD camcorder is first turned on, the
date will be "12:00AM 1/1/2000".
2. Press the MENU button in the recording pause mode to display the
menu screen.
3. Use the Select dial to choose "DATE/
TIME " and then "DATE SET".
"BACK" is being highlighted.
4. Turn the Select dial to choose "SET" and
then press the Select dial.
The date and time will appear, and "12" will be
highlighted and blinking.
(The digit that blinks first depends on the date dis-
play format. The digit on the left end of the time
will blink.)
POWER