Filter
Top Products
74
chapter 3_Recording
Checking EIS ON or OFF
You can check whether electronic image stabilizer is
engaged or not by reviewing the on-screen informa-
tion.
Note that the setting of electronic image stabilizer will not change when the DVD
camcorder is turned off: After recording with EIS set to OFF, it is recommended that
you return the setting to “ON” and then turn the DVD camcorder off, unless you
always record with “OFF” setting.
This function is effective only when recording movies: It does not operate when re-
cording stills.
Manually Focusing Subject during Movie Recording
The DVD camcorder measures the distance to a subject viewed at the center of
screen and automatically focuses on it. If you want to record by adding special effects
or focusing on a subject image off the center of screen, adjust the focus manually.
1. Press the FOCUS button in the record-
ing pause status.
“FOCUS” will appear on the screen.
Tip:
• Pressing FOCUS will alternate between manual focus
and auto focus. With auto focus, no indication will
appear on the screen.
FOCUS
Electronic image stabilizer
Manual Focus indicator