Panasonic AG-HPG20 Camera Accessories User Manual


 
12
How to use the unit
Housed in a compact cabinet which can be battery-powered, this Memory Card Portable Recorder is
a compact recording/playback unit coming with two P2 card slots, a 3.5-inch LCD monitor, USB 2.0,
IEEE1394, composite signal, SDI and many other input/output signal connectors. It can be easily operated
to play back the data content which has been shot by a P2 camera recorder. It is also capable of backup
recording and file management, and it supports outdoor field recording.
Playing back data content on the P2 card
1
Playing back the data on the unit’s LCD
monitor (Page 57)
Data content (both pictures and sound) which has been shot on P2 cards using a P2 camera recorder can
be played back on the spot.
2
Outputting the data to the external monitor
for playback (Page 62)
The data content (both pictures and sound) on P2 cards can be output to the external monitor, and played back.
Recording data on P2 cards
3
1394 connection (Page 63)
You can record data on P2 cards by connecting the unit to the external devices equipped with 1394
(DVCPRO/DV stream) output, such as a P2 camera recorder. The unit’s recording start and stop
operations can be performed from some camera recorders.
Recording in AVC-Intra100 and AVC-Intra50 modes is not possible with 1394 input.
P2 camera recorder
AG-HPG20
AG-HPG20
P2 card
AG-HPG20 (this unit)
HD/SD-SDI output
Video output/Audio
output
AG-HPG20
1394 cable
P2 camera recorder
P2 card
External monitor
AG-HPG20 (this unit)
AG-HPG20 (this unit)
P2 card
Use VIDEO/SDI/1394 output for monitoring purpose in other modes than playback mode. It is not
suitable for recording purpose because Pictures/Sound/Time cord (TC/UB) may become incorrect.
If the content on the P2 card has been recorded in DVCPRO HD, DVCPRO50, DVCPRO25 or DV
format, signals are also output from DVCPRO/DV input/output connector (IEEE1394).
(AVC-Intra100 and AVC-Intra50 do not support 1394 output)