Filter
Top Products
50
Adding the meta-data to clips (continued)
How the COUNT value of USER CLIP NAME is added when the data exceeds 4 GB
In the following cases, 1 shot is recorded as multiple clips and the COUNT value is added by 1 increment
and recorded.
When a P2 card with the capacity of over 8 GB is used and the continuous recording at a time exceeds a
certain period of time
For further details, refer to “Dividing clips over 4 GB in size” (Page 31).
When 1 recording straddles 2 cards and is recorded on both cards
Furthermore, when performing thumbnail display and property display using the P2 device, Clip 1’s
thumbnail and COUNT value are displayed.
Loading the meta-data setting value
You can load the meta-data setting value from the SD card according to the following operation.
1 Insert the SD card containing the meta-data upload file into this unit.
2 Display the thumbnail display screen.
3 Press [MENU/MODE CHK].
4 With cross cursor operation, move the cursor to “META DATA”–“LOAD” and press .
The file name of the meta-data upload file in the SD card is displayed.
5 With cross cursor operation, move the cursor to the file to be loaded and press .
6 Move the cursor to “YES” and press .
The meta-data is loaded.
7 Press [MENU/MODE CHK] to end the procedure.
•
•
Clip management (continued)