Filter
Top Products
The underlined settings are the factory mode settings.
95
Menu
TIMECODE SETUP screen (continued)
Item Description of settings
VITC BLANK This is used during playback to set whether to output VITC signal to the position set
on the setting menu “VITC POS-1” or “VITC POS-2”.
BLANK:
Not output
THRU:
Output
<Note>
This setting is effective only for VIDEO output and SD-SDI output.
VITC POS-1 This is used to set the insert position of VITC signal.
(When 59.94 Hz has been set)
10L
I
16L
I
20L
(When 50Hz has been set)
7L
I
11L
I
22L
<Note>
You cannot select the same line as the lines for “VITC POS-2” on the “TIMECODE
SETUP” screen or “UMID POS” on the “AV OUT SETUP” screen.
This setting is effective only for VIDEO output and SD-SDI output.
•
•