Panasonic AG-HPG20 Camera Accessories User Manual


 
23
Preparations
This unit is provided with three kinds of screens: the thumbnail display screen, normal display screen
(SDI/1394 input recording standby mode, INT SG (Page 91), playback standby mode, etc.) and PC mode
screen (USB HOST mode, USB DEVICE mode). When [MENU/MODE CHK] is pressed on any of these
screens, the menu will be displayed. (No menus are displayed in the USB DEVICE mode)
Operations performed when the function buttons are pressed
Menu operations
AG-HPG20
EXIT/2
ALT/3
This is used to move the menu highlighting to the item above;
depending on the menu item, it is used to change the value.
This is used to select items and
enter their values. When there is a
sub-menu, it is used to display the
sub-menu.
This is used to move the menu
highlighting to the item on the right;
depending on the menu item, it is
used to change the value.
This is used to move the menu
highlighting to the item on the left;
depending on the menu item, it is
used to change the value.
This is used to display
the menus. When it is
pressed while a menu is
displayed, the menu is
exited.
This is used to move the menu highlighting to
the item below; depending on the menu item, it
is used to change the value.
Example of a menu operation: (when the
thumbnail display screen is displayed)
1 Press [MENU/MODE CHK] to display the
menu.
2 Press and to move the menu
highlighting, and select the item.
3 Press .
If another menu has been displayed, repeat
steps 2 and 3.
Depending on the item, the value is changed
using , , and .
Depending on the item, a confirmation screen
will be displayed.
Depending on the item, the original screen is
restored automatically.
4 Press [MENU/MODE CHK] to exit the menu.
For details on the menu operations on the normal
display screen, refer to “Basic operations on the
setting menus” on page 88.
When EXIT is assigned
to [EXIT/2], if you press
[EXIT/2] while a menu
is displayed, the menu
is exited.