Filter
Top Products
The underlined settings are the factory mode settings.
List of setting menus (continued)
98
PLAYBACK FUNCTIONS screen
Item Description of settings
REPEAT PLAY This is used to set repeat playback. (Page 59)
ON:
After playing back the last clip, the first clip is played back in succession.
OFF:
After playing back the last clip, playback stops.
<Note>
Repeat playback is not performed when playing back from the bottom of the text
memo screen.
If a P2 card is ejected during repeat playback, playback stops when the clip on the
ejected P2 card is reached.
If a P2 card is inserted during repeat playback, the clips on the inserted P2 card will
be played back when repeat playback is next performed.
•
•
•
AUDIO OUT This is used to set the audio signals to be output from the AUDIO OUT connectors
(pin jacks), speaker and headphone jack.
CH1 · CH2:
CH1 connector = CH1 signal, CH2 connector = CH2 signal
CH1:
CH1 connector = CH1 signal, CH2 connector = CH1 signal
CH2:
CH1 connector = CH2 signal, CH2 connector = CH2 signal
CH3
· CH4:
CH1 connector = CH3 signal, CH2 connector = CH4 signal
CH3:
CH1 connector = CH3 signal, CH2 connector = CH3 signal
CH4:
CH1 connector = CH4 signal, CH2 connector = CH4 signal
CH5 · CH6:
CH1 connector = CH5 signal, CH2 connector = CH6 signal
CH5:
CH1 connector = CH5 signal, CH2 connector = CH5 signal
CH6:
CH1 connector = CH6 signal, CH2 connector = CH6 signal
CH7 · CH8:
CH1 connector = CH7 signal, CH2 connector = CH8 signal
CH7:
CH1 connector = CH7 signal, CH2 connector = CH7 signal
CH8:
CH1 connector = CH8 signal, CH2 connector = CH8 signal