Filter
Top Products
- 34 -
Connection of the Indoor Pan-tilt Head AW-PH405 (continued)
When an SDI card (AW-HHD870) has been installed
Use a coaxial cable to connect the SDI OUT connector on the SDI card and the SDI IN connector on the AW-PH405.
Use a coaxial cable to connect the SDI connector on the AW-PH405 to the SDI input connector on the color monitor.
When transmitting HD (1080i or 720p) analog component signals, the switch inside the AW-PH405 main unit must be set
to the HD position (the operation of the cable compensation circuit is not involved). Consult your dealer.
Note
AW-IF400 Switch settings (when the AW-RP400 is used)
SW1 SW2
SET UP
1234
OFF ON OFF ON OFF OFF
System configuration (Connections)