Filter
Top Products
- 50 -
Use mode setting
Selecting
1. Turn the camera on while keeping the MENU switch
depressed.
The use mode setting menu appears on the monitor
screen.
2. The cursor moves each time the UP/ABB switch or
the DOWN/BAR switch is pressed.
Move the cursor to the desired use mode.
3. Press the ENTER/AWB switch.
The selecting use mode comes into effect.
After the use mode setting menu is shown for about
5 seconds, the camera returns to be ready for
operation.
Then, the camera operates in the selected use mode.
MENU switch
ENTER/AWB switch
UP/ABB switch
DOWN/BAR switch
Use Mode Set
Halogen
Fluorescent
Outdoor
User