Filter
Top Products
- 83 -
Flare correction level setting
[Flare R/G/B: 0
to
100]
Flare correction level can be adjusted.
Black stretch setting [Black Stretch: Off, On]
Black stretch to correct the suppression of black portions
at low luminance can be set to OFF or ON.
SD (480i) 2D LPF [SD 2D LPF: Off, Low, High]
This enables the cross color of the composite and Y/C
signal output to be reduced by two levels.
The setting of this item has no effect on the HD (1080i or
720p) format, RGB, Y/Pb/Pr or SDI signals.
EBU matrix setting [EBU Matrix Set: Off, On]
Off: This reverts settings of the color matrix, color
correction and chroma level adjustment back to
respective levels prior to the EBU matrix setting.
On: This enables the EBU matrix setting to be selected
for the color matrix, chroma level adjustment and
color correction items.
(Refer to “Setting the EBU matrix” on page 88.)
Video output format setting
[Format: 480i, 720p, 1080i]
This enables the video output format to be selected.
(Refer to “Changing the format settings” on page 86.)
Down-conversion mode selection
[Downconv. Mode: Squeeze, Sidecut]
Squeeze or Sidecut can be selected as the
down-conversion mode for the SD (480i) format.
Menu item setting/changing (User Mode)