Filter
Top Products
- 9 -
Special notes on operation
Turn power off before connecting or disconnecting cables.
Connection or disconnection of any studio cable or other
cable to any unit of equipment must be performed while
power is off.
While the camera is in automatic mode;
Shooting of bright objects in ELC operation mode may
result in a smeared picture unique to the CCD.
The ATW function under fluorescent illumination can
adversely change the white balance.
There is a cooling fan inside.
The cooling fan is a consumable part.
Replace it 3 to 5 years after installation as a general rule.
When the cooling fan malfunctions, the “Fan Error”
message is displayed when the power is turned ON.
When the “Fan Error” message is displayed, request
replacement of the cooling fan.
(Whenever fan replacement is necessary, be sure to ask
the store where you purchased the set.)
Fan Error