Filter
Top Products
- 56 -
Total pedestal level adjustment
(Use an oscilloscope or a waveform monitor for this
adjustment.)
This step is to adjust the black levels (pedestal levels) of
two or more cameras to be the same.
Please contact your dealer for the adjustment.
1. Close the lens.
2. Select Pedestal item in the Brightness Set sub menu.
3. Set the pedestal level to 5 IRE (0.035 V) with the
UP/ABB switch or the DOWN/BAR switch.
UP/ABB switch
DOWN/BAR switch
Brightness Set
Picture Level 0
Light PEAK/AVG 0
Light Area Top Cut
Shutter Mode Step
Step/Synchro Off
Gain 0dB
AGC Max Gain ---
Pedestal 0
Return
Adjustment