Filter
Top Products
- 46 -
How to operate the system
Control exercised from the Multi Hybrid Control Panel AW-RP555
For executing AWB. *1, *2
For switching WHITE BAL A,
B or ATW. *5
For switching the SCENE file
(User/Halogen/Fluorescent/
Outdoor).
For executing ABB. *1, *4
Use these buttons to perform the
camera menu operations.
MENU: This operates in the same
way as MENU on the
camera.
ITEM: This operates in the same
way as ENTER on the
camera.
YES: This operates in the same
way as UP on the camera.
NO: This operates in the same
way as DOWN on the
camera.
Flashes when an alarm
(Fan Error) is received
from the camera. *3
For selecting the cameras and pan-tilt head
systems to be operated.
Each time the MODE button is pressed, the
setting is switched between CAM and BAR.
The MODE button lights up at the BAR setting.
Each time the GAIN button is pressed, the setting is
switched in the sequence of GAIN AUTO 0dB
L (9dB) H (18dB), and the mode is displayed by the
LEDs as shown below.
[ON: LED lighted; OFF: LED off]
GAIN button MANU L LED MANU H LED
AUTO ON OFF OFF
0dB OFF OFF OFF
LOW OFF ON OFF
HIGH OFF OFF ON
Others OFF ON ON
Shutter mode selection
Each time this button is pressed, one of the shutter modes set by
the controller or “shutter OFF” is selected.
The SHUTTER button lights up in all modes except shutter OFF.
The shutter mode settings established by the PRESET buttons are
as follows.
MODE PRESET No. MODE PRESET No.
1/100 PRESET1 1/4000 PRESET6
1/250 PRESET2 1/10000 PRESET7
1/500 PRESET3 SYNCHRO-SCAN PRESET8
1/1000 PRESET4 ELC PRESET9
1/2000 PRESET5 OFF PRESET10