Filter
Top Products
- 59 -
Adjustment
Color phase adjustment
Color phase adjustment is necessary only for the composite
or Y/C signals of the SD format.
Adjust the color phase of the camera to the basic color tone
such as program output signal (split color bar output signal)
from the color special effect generator.
Color bar of camera
Split line
Color bar of special
effects generator
Adjustment by camera menu
Press the DOWN/BAR switch for over 2 seconds to
display the color bar.
Press the MENU switch for 3 seconds or more to display
the main menu.
Press the UP/ABB switch or the DOWN/BAR switch to
move the cursor to [G/L Set], then press the ENTER/AWB
switch to display the G/L Set sub menu.
Select [SC Coarse] on the G/L Set sub menu.
Make coarse adjustment with the UP/ABB switch and the
DOWN/BAR switch.
Select [SC Fine] on the sub menu.
Perform fine adjustment with the UP/ABB switch and the
DOWN/BAR switch.
The amount of adjustment for adjusting [SC Fine] can be
selected with [H Phase, SC Fine Step].