Filter
Top Products
- 67 -
Menu item setting/changing (Halogen, Fluorescent, Outdoor Mode)
G/L Set
Horizontal phase adjustment
[H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock signal
is supplied.
Subcarrier phase coarse adjustment
[SC Coarse: 0deg, 45deg, 90deg, 135deg,
180deg, 225deg, 270deg, 315deg]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
Valid for the composite and Y/C signals of the SD format.
Subcarrier phase fine adjustment
[SC Fine: –127 to +127]
Fine adjustment of subcarrier phase can be made when
a genlock signal is supplied.
Valid for the composite and Y/C signals of the SD format.
Horizontal phase and color phase fine
adjustment
[H Phase, SC Fine Step: 1 to 10]
The level of horizontal phase adjustment and color phase
fine adjustment can be selected simultaneously.
Other Set
Contrast adjustment
[Contrast (Gamma): Low, Mid, High]
Contrast can be adjusted to any of three levels.
SD (480i) 2D LPF [SD 2D LPF: Off, Low, High]
This enables the cross color of the composite and Y/C
signal output to be reduced by two levels.
The setting of this item has no effect on the HD (1080i or
720p) format, RGB, Y/Pb/Pr or SDI signals.
Video output format setting
[Format: 480i, 720p, 1080i]
This enables the video output format to be selected.
(Refer to “Changing the format settings” on page 86.)