Filter
Top Products
121
VQT2A80
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P29.
You can adjust the flash output.
Applicable modes:
[U2 EV]/[U1 2/3 EV]/[U1 1/3 EV]/[U1 EV]/[U2/3 EV]/[U1/3 EV]/[0 EV]/[T1/3 EV]/
[T2/3 EV]/[T1 EV]/[T1 1/3 EV]/[T1 2/3 EV]/[T2 EV]
Note
• Refer to P68 for details.
For details on [REC] mode menu settings, refer to P29.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
• Even when the [SENSITIVITY] is set to [ISO100]/[ISO125], [SENSITIVITY] may be set higher
than [ISO100]/[ISO125] if the picture is taken with [I.EXPOSURE] set to valid.
• Compensation effect may not be achieved depending on the conditions.
• [ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.
• [LOW], [STANDARD], or [HIGH] represents the maximum range of effect.
For details on [REC] mode menu settings, refer to P29.
Enlarging a picture with no picture quality deterioration
Applicable modes:
[OFF]/[ON]
Note
• Refer to P54 for details.
For details on [REC] mode menu settings, refer to P29.
This can enlarge subjects even more than the optical zoom or extra optical zoom.
Applicable modes:
[OFF]/[2V]/[4V]
Note
• Refer to P54 for details.
• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be
set to [MODE1].
[FLASH ADJUST.]
[I.EXPOSURE] (Intelligent exposure adjustment)
[EX. OPT. ZOOM]
) [DIGITAL ZOOM]